www.izcorp.com • 1.800.776.1356
When scrolling through the list of drives, the size of the disk (if available) will be displayed.
For example:
Use the and keys to select the folder to browse and press the or key. Use the
or key to go to the previous directory level.
If a folder name is shown, it will be followed by a / and #=MB will appear. This means
pressing the key on the Session Controller or KC-24 will calculate the size of the
folder (this may take several seconds). Pressing the key a second time will indicate the
number of files in the folder. If a file name is shown, the size will automatically be
displayed. If the file contains WAV or BWAV PCM audio, then pressing the key will
display the format, sample rate and bit resolution. The size will be remembered until the
main menu is exited in case the user wishes to scroll back to that folder or file.
Use the and keys to view names that are too long to fit in the Session Controller
LCD display and/or the menu window of RADARView.
Pressing the on the Session Controller or the key on the KC-24 will
indicate space available on the current drive.
At the file level (lowest directory), the following will be evident:
a. The keyboard and numeric keys, the and keys or the Jog/Shuttle Wheel will
browse the individual file(s).
b. Pressing the key or key will return a NO MORE LEVELS, PRESS ANY BUTTON
prompt.
To copy and paste files and/or folders:
Hold the key and press the letter or use the , the and keys and the
key to go to the MAIN MENU / FILE MENU / FILE MANAGEMENT selection and press
the key.
Use the and keys to select the drive to browse (copy from) and press the key.
Use the keyboard and numeric keys, the and keys, Jog/Shuttle Wheel as well as the ,
and keys to navigate to the file or folder to copy and then press the key. The top
right corner of the Session Controller LCD and/or menu window of the RADARView display will
specify the size. The + symbol indicates that it has been selected. For example:
COPY: 6.6MB+
MY SONG/
BROWSE: 4.3 GB
B:DVD - RAM FAT32