iZ Technology RADAR - Page 122

iZ Technology Corporation
RADAR 3.50
OPERATIONS
115
Press the key to permanently delete the selected location marker.
It will return to the main EDIT LOC dialogue. To exit, press , or press the
key again.
To delete a range of location markers between the and locate points:
Press the key on the Session Controller or KC-24.
Use the and keys to select DEL and press the key.
Use the and keys in the SELECT LOCATES dialogue to select RANGE and press the
key.
A dialogue will ask DEL BETWEEN MARK IN + OUT? Select YES and press the key to
continue.
The display will return to the main EDIT LOC dialogue. To exit, press , or press
the key again.
To delete all of the location markers in a project:
Press the key on the Session Controller or KC-24.
Use the and keys to select DEL and press the key.
Use the and keys in the SELECT LOCATES dialogue to select ALL and press the
key.
A dialogue will ask DEL ALL LOCATE POINTS? Select YES and press the key to
continue.
The display will return to the main EDIT LOC dialogue. To exit, press , or press
the key again.
The deletion of location markers is a permanent operation and cannot be undone.
This option can be used to create location markers for a project. Location markers can also be set on the
fly using the , , and keys on the Session Controller or the KC-24.
See OPERATIONS: TRANSPORT OPERATIONS: AUTO LOCATE MARKERS for more information.