www.izcorp.com • 1.800.776.1356
To paste audio:
Press the key on the Session Controller or the KC-24 or use the , the and
keys and the key to go to the MAIN MENU / EDIT MENU / PASTE menu item and
press the key.
Select the tracks to paste to. Use the and keys to select either SAME or OTHERS. Use
the Track Arm keys to select individual tracks. Press the key.
Use the and keys to select either the INSERT or OVERWRITE paste modes and press
the key.
To set a PASTE TO: point (s) and paste the track-region, select one of the following methods:
• Use any of the transport/locate functions or the Jog/Shuttle Wheel to move to the desired
location. Press the key to paste.
• For an ORIGINAL TIME PASTE, press the key while in the PASTE TO:
dialogue and select ORIG TIME. Press the key to paste. The audio will then be
pasted back to its original time location.
• For a BACK TIME PASTE, use any of the transport/locate functions or the Jog/Shuttle
Wheel to move to the desired location and press the
key to place a PASTE TO:
point. Press the key to paste. The audio will be pasted so that the end of track-region
lines up with the PASTE TO: point.
• For MULTIPLE PASTES, use any of the transport/locate functions or the Jog/Shuttle
Wheel to move to the desired location and press the , or key to
place an initial PASTE TO: point. Reposition the transport and place additional PASTE TO
points by pressing the , and/or key. Press the key to
execute the multiple paste.
• For a SYNC MARKER PASTE, use any of the transport/locate functions or the Jog/Shuttle
Wheel to move to the desired location and press the key to place a PASTE TO:
point. Press the key to paste. Any clipboard material that contains a MARK SYNC
point will automatically use it for reference and the MARK SYNC point will be aligned to the
PASTE TO location.
Multiple paste markers can be set during playback.
To Next Page
Loading...
