www.izcorp.com • 1.800.776.1356
At the FLATTEN PROJS?: prompt the options will be:
• SELECTED PROJS (select multiple projects using key)
• CURRENT PROJ (select current project)
• ALL (select all projects)
Then press the key.
If GAP or ALL is selected and the regions contain gaps or different start times, RADAR will need
additional drive space. At the XXX MB REQUIRED PROCEED? prompt, select YES and press
the key.
The CANT CANCEL/UNDO PROCEED? prompt indicates that a destructive process is about to
be selected. All undo levels will be lost on this project. Select YES and press the key.
Use the , the and keys and the key to go to the MAIN MENU / DISK
MENU / UNMOUNT dialogue and press the key.
Remove the recording drive from RADAR and plug the drive into a receiver connected to a Mac
or PC.
The workstation computer will mount the drive and the consolidated files and project notes will be
located in a new folder titled after the project name within the USER directory.
Copy this project folder over to a DAW recording drive or firewire drive for DAW manipulation.
After file copy is complete, safely unmount the drive from the workstation.
Do not write or delete any files on the RADAR recording drive when mounted on the Mac
or PC. This drive is read only, and any modification will possibly destroy any data on the
RADAR drive.
To Next Page
Loading...
