iZ Technology Corporation
This is a dual press activation/de-activation key. The first key press displays
the VARI-SPEED value and the next key press engages VARI-SPEED.
Pressing the key while VARI-SPEED is engaged once again displays the
speed value and pressing it a second time disengages VARI-SPEED. To
change the speed while the function is engaged, press the key
once to display the speed dialogue, change the value and hit the key
to return to transport mode. This setting may be changed while in PLAY
mode. For further information please refer to OPERATIONS: VARI-SPEED.
(ROUTE)
This shortcut key allows for quick selection of digital I/O format or routing. The
shifted ROUTE function sets the 2-channel I/O source and destination tracks
and determines whether track inputs are analogue or digital. For more
information see CONFIGURATION: DIGITAL I/O.
(OFFSET)
The shortcut key allows for quick selection of an external digital sync
source for digital I/O formats. The shifted (OFFSET) allows for a SMPTE
time to be entered to create an offset with other LTC synchronized devices.
For details refer to CONFIGURATION: DIGITAL I/O and CONFIGURATION :
TIMECODE.
This key is one of 2 on the Session Controller. The SHIFT function
can be used for capitalization when entering information or to select the
shifted key functions on the remote.
When is pressed the system will abort any current operations and
return to transport ready mode. can also be used to completely exit
the menu tree or to abort a file I/O operation such as backup or restore.
The key is used to drop locate markers along the project timeline.
Markers can be dropped while playback is stopped or in any transport mode
including fast-forward or rewind.
The key is used to modify locate markers that have been placed
along the project timeline. See OPERATIONS: TRANSPORT OPERATIONS: AUTO
LOCATE MARKERS for detailed information.
(TC PREFS)
When pressed, this key puts the system into CHASE mode using the
parameters set in the MAIN MENU / SYNC MENU / TC SETTINGS menu.
The shifted function (TC PREFS) acts as a direct access shortcut to these
settings. For further information please consult CONFIGURATION: TIMECODE.
(REDO)
The number of UNDO and REDO levels is dependent on the setting in the
MAIN MENU / PROJECT MENU / UNDO LEVELS dialogue. See
OPERATIONS: RECORDING: UNDO/REDO for further information.
To Next Page
Loading...
