www.izcorp.com • 1.800.776.1356
PC FTP Server Username and Password:
Open FTP Server.
Click on EDIT then click USERS.
Click the GENERAL tab and then click ADD.
Type in a username and password.
Click the SHARED FOLDERS tab and add a drive or directory to import/export to.
Highlight the DIRECTORY added and check all the boxes under FILES AND DIRECTORIES.
RADAR FTP client setup:
Use the key, the and keys and the key to go to MAIN/PREFERENCES
MENU/NETWORK PREFS/SERVER PREFS and press the key. Press the key
again on NETWORK PROTOCOL
At the NETWORK PROTOCOL: prompt, press the key on FTP.
At the SERVER IP ADDR: prompt, use the numeric keypad and the and to enter the PC’s
server IP address and press the key. (i.e. 192.168.1.2)
At the SERVER NAME: prompt, use the QWERTY keyboard to enter a name for the FTP Server.
(i.e. Win XP) (Note: This is display only, and should not impact functionality.)
At the SAVE CHANGES: prompt, press the key on YES.
Once FTP/CIFS server Information has been entered it is a good idea to test the
connection. To do this, go to MAIN MENU / DIAGNOSTICS MENU / PING IP
ADDRESS. This provides a way to test communication by sending small packets of data
across the network. By default the SERVER IP will be entered in this field. Press at
the PING IP ADDRESS: prompt. REPLY RECEIVED means the server is reachable. If
the message NO REPLY is displayed, recheck the networking settings on both the RADAR
and Server.
To Next Page
Loading...
