iZ Technology Corporation
Use the , the and keys and the key to immediately reselect the MAIN
MENU / PROJ MENU / UNDO LEVEL and press the key.
Use the and keys to set the undo level back to the previous setting and press the
key.
Clearing the Undo list is not necessary when using the BWAV (NO UNDO) backup type.
BACKING UP A PROJECT
When backing up RADAR projects there are 4 options available: BWAV, RADAR, BOTH or DSET.
Projects backed up from an audio drive initialized for RADAR_BWAV cannot be restored on an audio
drive initialized as !RADAR!.
If attempting to restore a non-BWAV project on a BWAV audio drive the RADAR will display: CAN’T
RESTORE NON BWAV AUDIO.
If attempting to restore a BWAV project on a Non-BWAV drive the RADAR will display: CAN’T RESTORE
BWAV AUDIO.
It is possible to restore backups from RADAR I or II onto a current generation RADAR. To do this the
audio drive must be initialized for !RADAR! and CLUSTER SIZE: 128K.
To mount a Non-BWAV drive from a RADAR using 3.XX software onto RADAR I or II the
MAKE PORTABLE option must be chosen before attempting to mount the drive.
Multiple backup devices can be connected to the RADAR simultaneously for the greatest level of flexibility
and compatibility. This allows the ability to restore from one format and archive to another if needed.
Follow the backup instructions below for details on selecting the current archival device.
BWAV (NO UNDO)
Selecting BWAV at the BACKUP TYPE: prompt will back up the
selected projects in Broadcast WAVE (BWAV) format. The BWAV
files in the Audio Files sub-folder of the backup will be named
according to the FILE NAME FORMAT specified in the FILE PREFS.
Backing up in this format can also replace FILE EXPORT and useful
when needing to backup multiple projects.
RADAR (WITH UNDO)
Selecting RADAR at the BACKUP TYPE: prompt will back up the
selected projects in RADAR’s proprietary format and include all undo
levels.
To Next Page
Loading...
