www.izcorp.com • 1.800.776.1356
At the EXPORT: TRACKS dialogue, select the tracks to export using TRACK ARM keys 1
through 24 or choose the ALL option and then press the key.
If exporting a stereo file for the purpose of burning an audio CD, use the EXPORT:TRACKS
LEFT:00 RIGHT:00 dialogue to define the two tracks to use to create the stereo [interleaved]
audio track. When finished selecting the track(s), press the key.
To only burn one track, select the same track for both left and right.
If exporting for the purpose of burning an audio CD, proceed to step 13.
The EXPORT TO DISK dialogue will appear while RADAR marks the files. Next, a confirmation
dialogue displaying the size or estimated time of the export may appear, depending on the
SHOW SIZE preference in the FILE PREFS menu. Select YES and press the key to
proceed.
To set the SHOW SIZE preference:
a. Use the , the and keys and the key to go to the MAIN MENU /
FILE MENU / FILE PREFS / SHOW SIZE selection and press the key.
b. Use the and keys to select OFF, MBYTES or TIME and then press the key.
The factory default setting is MBYTES.
The final stages of the CDAUDIO export will contain the following:
a. If burning directly to a CD, it will prompt the user at the FINALIZE CD dialogue. If finalize
now is selected, additional tracks CANNOT be added at a later time. Use the and
keys to select NO or YES and then press the key.
b. If exporting to a folder/directory for the purpose of burning an audio CD at a later time, it will
prompt the user at the FILE NAME: dialogue. Use the keyboard to type in a name and
then press the key. The default file name given consists of PROJECT NAME-
STEREO.WAV. For example: THE DRUDDS-STEREO.WAV. If the same file name exists
within the folder/directory, the OVERWRITE FILE? NO YES dialogue will appear. If NO is
selected, it will return to the FILE NAME: dialogue where the name can be changed in
order to export the file. If YES is selected, the previous file will be overwritten and will NOT
be recoverable.
To finalize (close) the CD at any time, use the FINALIZE CD option located at MAIN
MENU / FILE MENU / FINALIZE CD.
To Next Page
Loading...
