iZ Technology Corporation
To set the FILL SILENCE preference:
a. Use the , the and keys and the key to go to the MAIN MENU /
FILE MENU / FILE PREFS / FILL SILENCE selection and press the key.
b.
At the FILL SILENCE prompt, use the and keys to select:
ASK Will prompt for fill silence option each export/BWAV backup.
FILL GAPS ONLY FILL ALL GAPS without front or back fill.
FRONT FILL+GAPS FRONT FILL and FILL GAPS without BACK FILL.
GAPS+BACK FILL BACK FILL and FILL GAPS without FRONT FILL.
FRONT+GAPS+BACK FRONT and BACK FILL and FILL GAPS
NO Each export/BWAV backup will transfer with no fill options
Make a selection and press the key. The factory default setting is ASK.
At the EXPORT: TRACKS dialogue, select the tracks to export using Track Arm keys
through or choose the ALL option and then press the key.
The EXPORT TO DISK dialogue will appear while RADAR marks the files. Next, a confirmation
dialogue displaying the size or estimated time of the export may appear, depending on the
SHOW SIZE preference in the FILE PREFS menu. Select YES and press the key to
proceed.
To set the SHOW SIZE preference:
a. Use the , the and keys and the key to go to the MAIN MENU /
FILE MENU / FILE PREFS / SHOW SIZE selection and press the key.
b. Use the and keys to select OFF, MBYTES or TIME and then press the key.
The factory default setting is MBYTES.
The export is complete once the EXPORT COMPLETE PRESS ANY BUTTON dialogue appears
or the CD burn is finished.
After you have finished using a USB drive, make sure you unmount it before unplugging it
from RADAR. You can access the MOUNT/UNMOUNT dialog via the DISK MENU or by
pressing + UNMNT on the Session Controller.
To Next Page
Loading...
