133
Keysight InfiniiVision DSOX1204A/G Oscilloscopes
Programmer's Guide
6 Root (:) Commands
Control many of the basic functions of the oscilloscope and reside at the root level
of the command tree. See "Introduction to Root (:) Commands" on page 135.
Table 44 Root (:) Commands Summary
Command Query Options and Query Returns
n/a :AER? (see page 136) {0 | 1}; an integer in NR1 format
:AUToscale
[<source>[,..,<source
>]] (see page 137)
n/a <source> ::= CHANnel<n>
<source> can be repeated up to 5
times
<n> ::= 1 to (# analog channels)
in NR1 format
:AUToscale:AMODE
<value> (see page 139)
:AUToscale:AMODE?
(see page 139)
<value> ::= {NORMal | CURRent}}
:AUToscale:CHANnels
<value> (see page 140)
:AUToscale:CHANnels?
(see page 140)
<value> ::= {ALL | DISPlayed}}
:AUToscale:FDEBug {{0
| OFF} | {1 | ON}}
(see page 141)
:AUToscale:FDEBug?
(see page 141)
{0 | 1}
:BLANk [<source>]
(see page 142)
n/a <source> ::= {CHANnel<n> |
FUNCtion | MATH | FFT |
WMEMory<r> | ABUS}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
:DIGitize
[<source>[,..,<source
>]] (see page 143)
n/a <source> ::= {CHANnel<n> |
FUNCtion | MATH | FFT | ABUS}
<source> can be repeated up to 5
times
<n> ::= 1 to (# analog channels)
in NR1 format
To Next Page
Loading...
Need help?
General
