Keysight Technologies InfiniiVision DSOX1204A User Manual

486 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
24 :SBUS<n> Commands
:SBUS<n>:IIC[:SOURce]:DATA
(see page 798)
Command Syntax
:SBUS<n>:IIC[:SOURce]:DATA <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :SBUS<n>:IIC[:SOURce]:DATA command sets the source for IIC serial data
(SDA).
Query Syntax
:SBUS<n>:IIC[:SOURce]:DATA?
The :SBUS<n>:IIC[:SOURce]:DATA? query returns the current source for IIC serial
data.
Return Format
<source><NL>
See Also • "Introduction to :TRIGger Commands" on page 585
• ":SBUS<n>:IIC[:SOURce]:CLOCk" on page 485

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English