Keysight Technologies InfiniiVision DSOX1204A User Manual

:TIMebase Commands 26
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 581
:TIMebase:WINDow:POSition
(see page 798)
Command Syntax
:TIMebase:WINDow:POSition <pos value>
<pos value> ::= time from the trigger event to the zoomed (delayed)
view reference point in NR3 format
The :TIMebase:WINDow:POSition command sets the horizontal position in the
zoomed (delayed) view of the main sweep. The main sweep range and the main
sweep horizontal position determine the range for this command. The value for
this command must keep the zoomed view window within the main sweep range.
Query Syntax
:TIMebase:WINDow:POSition?
The :TIMebase:WINDow:POSition? query returns the current horizontal window
position setting in the zoomed view.
Return Format
<value><NL>
<value> ::= position value in seconds
See Also • "Introduction to :TIMebase Commands" on page 574
• ":TIMebase:MODE" on page 575
• ":TIMebase:POSition" on page 576
• ":TIMebase:RANGe" on page 577
• ":TIMebase:SCALe" on page 579
• ":TIMebase:WINDow:RANGe" on page 582
• ":TIMebase:WINDow:SCALe" on page 583

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English