Keysight Technologies InfiniiVision DSOX1204A User Manual

258 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
14 :EXTernal Trigger Commands
:EXTernal:UNITs
(see page 798)
Command Syntax
:EXTernal:UNITs <units>
<units> ::= {VOLT | AMPere}
The :EXTernal:UNITs command sets the measurement units for the probe
connected to the external trigger input. Select VOLT for a voltage probe and select
AMPere for a current probe. Measurement results, channel sensitivity, and trigger
level will reflect the measurement units you select.
Query Syntax
:EXTernal:UNITs?
The :CHANnel<n>:UNITs? query returns the current units setting for the external
trigger.
Return Format
<units><NL>
<units> ::= {VOLT | AMP}
See Also • "Introduction to :EXTernal Trigger Commands" on page 249
• "Introduction to :TRIGger Commands" on page 585
• ":EXTernal:RANGe" on page 257
• ":EXTernal:PROBe" on page 256
• ":CHANnel<n>:UNITs" on page 220

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English