Keysight Technologies InfiniiVision DSOX1204A User Manual

720 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
31 Obsolete and Discontinued Commands
:DISPlay:CONNect
(see page 798)
Command Syntax
:DISPlay:CONNect <connect>
<connect> ::= {{ 1 | ON} | {0 | OFF}}
The :DISPlay:CONNect command turns vectors on and off. When vectors are
turned on, the oscilloscope displays lines connecting sampled data points. When
vectors are turned off, only the sampled data is displayed.
Query Syntax
:DISPlay:CONNect?
The :DISPlay:CONNect? query returns the current state of the vectors setting.
Return Format
<connect><NL>
<connect> ::= {1 | 0}
See Also • ":DISPlay:VECTors" on page 240
NOTE
The :DISPlay:CONNEct command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :DISPlay:VECTors command (see page 240) instead.

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English