Keysight Technologies InfiniiVision DSOX1204A User Manual

:FUNCtion Commands 17
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 299
:FUNCtion:GOFT:OPERation
(see page 798)
Command Syntax
:FUNCtion:GOFT:OPERation <operation>
<operation> ::= {ADD | SUBTract | MULTiply}
The :FUNCtion:GOFT:OPERation command sets the math operation for the g(t)
source that can be used as the input to the FFT function:
• ADD — Source1 + source2.
• SUBTract — Source1 - source2.
• MULTiply — Source1 * source2.
The :FUNCtion:GOFT:SOURce1 and :FUNCtion:GOFT:SOURce2 commands are
used to select source1 and source2.
Query Syntax
:FUNCtion:GOFT:OPERation?
The :FUNCtion:GOFT:OPERation? query returns the current g(t) source operation
setting.
Return Format
<operation><NL>
<operation> ::= {ADD | SUBT | MULT}
See Also • "Introduction to :FUNCtion Commands" on page 291
• ":FUNCtion:GOFT:SOURce1" on page 300
• ":FUNCtion:GOFT:SOURce2" on page 301
• ":FUNCtion:SOURce1" on page 308

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English