To Next Page

To Previous Page

:MEASure Commands 20

Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 397

:MEASure:XMIN

(see page 798)

Command Syntax

:MEASure:XMIN [<source>]

<source> ::= {CHANnel<n> | FUNCtion | MATH | WMEMory<r>}

<n> ::= 1-2 or 1-4 (# of analog channels) in NR1 format

<r> ::= 1-2 in NR1 format

The :MEASure:XMIN command installs a screen measurement and starts an

X-at-Min-Y measurement on the selected window. If the optional source

parameter is specified, the current source is modified.

Query Syntax

:MEASure:XMIN? [<source>]

The :MEASure:XMIN? query measures and returns the horizontal axis value at

which the minimum vertical value occurs. If the optional source is specified, the

current source is modified.

Return Format

<value> ::= horizontal value of the minimum in NR3 format

See Also • "Introduction to :MEASure Commands" on page 350

• ":MEASure:XMAX" on page 396

• ":MEASure:TMIN" on page 736

NOTE

:MEASure:XMIN is an alias for :MEASure:TMIN.

Keysight Technologies InfiniiVision DSOX1204A User Manual

Questions and Answers: