To Next Page

To Previous Page

736 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide

31 Obsolete and Discontinued Commands

:MEASure:TMIN

(see page 798)

Command Syntax

:MEASure:TMIN [<source>]

<source> ::= {CHANnel<n> | FUNCtion | MATH}

<n> ::= 1 to (# analog channels) in NR1 format

The :MEASure:TMIN command installs a screen measurement and starts an

X-at-Min-Y measurement on the selected waveform. If the optional source is

specified, the current source is modified.

Query Syntax

:MEASure:TMIN? [<source>]

The :MEASure:TMIN? query returns the horizontal axis value at which the minimum

vertical value occurs on the current source. If the optional source is specified, the

current source is modified. If all channels are off, the query returns 9.9E+37.

Return Format

<value> ::= time at minimum in NR3 format

See Also • "Introduction to :MEASure Commands" on page 350

• ":MEASure:TMAX" on page 735

• ":MEASure:XMAX" on page 396

• ":MEASure:XMIN" on page 397

NOTE

The :MEASure:TMIN command is obsolete and is provided for backward compatibility to

previous oscilloscopes. Use the :MEASure:XMIN command (see page 397) instead.

Keysight Technologies InfiniiVision DSOX1204A User Manual

Questions and Answers: