Keysight Technologies InfiniiVision DSOX1204A User Manual

:CHANnel<n> Commands 10
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 207
:CHANnel<n>:DISPlay
(see page 798)
Command Syntax
:CHANnel<n>:DISPlay <display value>
<display value> ::= {{1 | ON} | {0 | OFF}}
<n> ::= 1 to (# analog channels) in NR1 format
The :CHANnel<n>:DISPlay command turns the display of the specified channel on
or off.
Query Syntax
:CHANnel<n>:DISPlay?
The :CHANnel<n>:DISPlay? query returns the current display setting for the
specified channel.
Return Format
<display value><NL>
<display value> ::= {1 | 0}
See Also • "Introduction to :CHANnel<n> Commands" on page 203
• ":VIEW" on page 165
• ":BLANk" on page 142
• ":STATus" on page 162

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English