Keysight Technologies InfiniiVision DSOX1204A User Manual

:FFT Commands 15
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 267
:FFT:SOURce1
(see page 798)
Command Syntax
:FFT:SOURce1 <offset>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format.
The :FFT:SOURce1 command selects the source for the FFT function.
Query Syntax
:FFT:SOURce1?
The :FFT:SOURce1? query returns the current source1 for the FFT function.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
See Also • ":FFT:CENTer" on page 261
• ":FFT:DISPlay" on page 262
• ":FFT:OFFSet" on page 263
• ":FFT:RANGe" on page 264
• ":FFT:REFerence" on page 265
• ":FFT:SCALe" on page 266
• ":FFT:SPAN" on page 268
• ":FFT:VTYPe" on page 269
• ":FFT:WINDow" on page 270
NOTE
Another shorthand notation for SOURce1 in this command/query (besides SOUR1) is SOUR.

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English