To Next Page

To Previous Page

Obsolete and Discontinued Commands 31

Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 735

:MEASure:TMAX

(see page 798)

Command Syntax

:MEASure:TMAX [<source>]

<source> ::= {CHANnel<n> | FUNCtion | MATH}

<n> ::= 1 to (# analog channels) in NR1 format

The :MEASure:TMAX command installs a screen measurement and starts an

X-at-Max-Y measurement on the selected waveform. If the optional source is

specified, the current source is modified.

Query Syntax

:MEASure:TMAX? [<source>]

The :MEASure:TMAX? query returns the horizontal axis value at which the

maximum vertical value occurs on the current source. If the optional source is

specified, the current source is modified. If all channels are off, the query returns

9.9E+37.

Return Format

<value> ::= time at maximum in NR3 format

See Also • "Introduction to :MEASure Commands" on page 350

• ":MEASure:TMIN" on page 736

• ":MEASure:XMAX" on page 396

• ":MEASure:XMIN" on page 397

NOTE

The :MEASure:TMAX command is obsolete and is provided for backward compatibility to

previous oscilloscopes. Use the :MEASure:XMAX command (see page 396) instead.

Keysight Technologies InfiniiVision DSOX1204A User Manual

Questions and Answers: