196 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
9 :CALibrate Commands
:CALibrate:PROTected
(see page 798)
Query Syntax
:CALibrate:PROTected?
The :CALibrate:PROTected? query returns the rear-panel calibration protect (CAL
PROTECT) button state. The value "PROTected" indicates calibration is disabled,
and "UNPRotected" indicates calibration is enabled.
Return Format
<switch><NL>
<switch> ::= {"PROTected" | "UNPRotected"}
See Also • "Introduction to :CALibrate Commands" on page 192