Keysight Technologies InfiniiVision DSOX1204A User Manual

686 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
29 :WGEN Commands
:WGEN:MODulation:FUNCtion:RAMP:SYMMetry
(see page 798)
Command Syntax
:WGEN:MODulation:FUNCtion:RAMP:SYMMetry <percent>
<percent> ::= symmetry percentage from 0% to 100% in NR1 format
The :WGEN:MODulation:FUNCtion:RAMP:SYMMetry command specifies the
amount of time per cycle that the ramp waveform is rising. The ramp modulating
waveform shape is specified with the :WGEN:MODulation:FUNCtion command.
Query Syntax
:WGEN:MODulation:FUNCtion:RAMP:SYMMetry?
The :WGEN:MODulation:FUNCtion:RAMP:SYMMetry? query returns ramp
symmetry percentage setting.
Return Format
<percent><NL>
<percent> ::= symmetry percentage from 0% to 100% in NR1 format
See Also • ":WGEN:MODulation:AM:DEPTh" on page 679
• ":WGEN:MODulation:AM:FREQuency" on page 680
• ":WGEN:MODulation:FM:DEViation" on page 681
• ":WGEN:MODulation:FM:FREQuency" on page 682
• ":WGEN:MODulation:FSKey:FREQuency" on page 683
• ":WGEN:MODulation:FSKey:RATE" on page 684
• ":WGEN:MODulation:FUNCtion" on page 685
• ":WGEN:MODulation:STATe" on page 688
• ":WGEN:MODulation:TYPE" on page 689

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English