To Next Page

To Previous Page

:ABUS Commands 7

Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 169

:ABUS:BIT<m>

(see page 798)

Command Syntax

:ABUS:BIT<m> <display>

<display> ::= {{1 | ON} | {0 | OFF}}

<m> ::= An integer, 0,..,3, is attached as a suffix to BIT

and defines the analog channel that is affected by the command.

The :ABUS:BIT<m> command includes or excludes the selected bit as part of the

definition for the selected bus. If the parameter is a 1 (ON), the bit is included in

the definition. If the parameter is a 0 (OFF), the bit is excluded from the definition.

Query Syntax

:ABUS:BIT<m>?

The :ABUS:BIT<m>? query returns the value indicating whether the specified bit is

included or excluded from the specified bus definition.

Return Format

<display> ::= {0 | 1}

See Also • "Introduction to :ABUS Commands" on page 168

• ":ABUS:BITS" on page 170

• ":ABUS:CLEar" on page 172

• ":ABUS:DISPlay" on page 173

• ":ABUS:LABel" on page 174

• ":ABUS:MASK" on page 175

Example Code

' Include analog channel 2 in the bus:

myScope.WriteString ":ABUS:BIT1 ON"

Bit Channel

0channel 1

1channel 2

2channel 3

3channel 4

Keysight Technologies InfiniiVision DSOX1204A User Manual

Questions and Answers: