Keysight Technologies InfiniiVision DSOX1204A User Manual

554 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
25 :SYSTem Commands
:SYSTem:PERSona[:MANufacturer]
(see page 798)
Command Syntax
:SYSTem:PERSona[:MANufacturer] <manufacturer_string>
<manufacturer_string> ::= ::= quoted ASCII string, up to 63 characters
The :SYSTem:PERSona[:MANufacturer] command lets you change the
manufacturer string portion of the identification string returned by the *IDN?
query.
The default manufacturer string is "KEYSIGHT TECHNOLOGIES".
If your remote programs depend on a legacy manufacturer string, for example, you
could use this command to set the manufacturer string to "AGILENT
TECHNOLOGIES".
Query Syntax
:SYSTem:PERSona[:MANufacturer]?
The :SYSTem:PERSona[:MANufacturer]? query returns the currently set
manufacturer string.
Return Format
<manufacturer_string><NL>
See Also • "*IDN (Identification Number)" on page 116
• ":SYSTem:PERSona[:MANufacturer]:DEFault" on page 555
• "Introduction to :SYSTem Commands" on page 547

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English