:TIMebase Commands 26
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 577
:TIMebase:RANGe
(see page 798)
Command Syntax
:TIMebase:RANGe <range_value>
<range_value> ::= time for 10 div in seconds in NR3 format
The :TIMebase:RANGe command sets the full-scale horizontal time in seconds for
the main window. The range is 10 times the current time-per-division setting.
Query Syntax
:TIMebase:RANGe?
The :TIMebase:RANGe query returns the current full-scale range value for the
main window.
Return Format
<range_value><NL>
<range_value> ::= time for 10 div in seconds in NR3 format
See Also • "Introduction to :TIMebase Commands" on page 574
• ":TIMebase:MODE" on page 575
• ":TIMebase:SCALe" on page 579
• ":TIMebase:WINDow:RANGe" on page 582
Example Code
' TIME_RANGE - Sets the full scale horizontal time in seconds. The
' range value is 10 times the time per division.
myScope.WriteString ":TIM:RANG 2e-3" ' Set the time range to 0.002
seconds.
See complete example programs at: Chapter 36, “Programming Examples,”
starting on page 807
To Next Page
Loading...
Need help?
General
