Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 7
Contents
In This Book / 3
1 What's New
What's New in Version 2.01 / 26
Version 2.00 at Introduction / 27
Command Differences From 1000 X-Series Oscilloscopes / 28
2 Setting Up
Step 1. Install Keysight IO Libraries Suite software / 32
Step 2. Connect and set up the oscilloscope / 33
Using the USB (Device) Interface / 33
Using the LAN Interface / 33
Step 3. Verify the oscilloscope connection / 35
3 Getting Started
Basic Oscilloscope Program Structure / 38
Initializing / 38
Capturing Data / 38
Analyzing Captured Data / 39
Programming the Oscilloscope / 40
Referencing the IO Library / 40
Opening the Oscilloscope Connection via the IO Library / 41
Initializing the Interface and the Oscilloscope / 41
Using :AUToscale to Automate Oscilloscope Setup / 42
Using Other Oscilloscope Setup Commands / 42
Capturing Data with the :DIGitize Command / 43
Reading Query Responses from the Oscilloscope / 45
Reading Query Results into String Variables / 46
Reading Query Results into Numeric Variables / 46
Reading Definite-Length Block Query Response Data / 46
Sending Multiple Queries and Reading Results / 47
Checking Instrument Status / 48
To Next Page
Loading...
Need help?
General
