Keysight Technologies InfiniiVision DSOX1204A User Manual

:SBUS<n> Commands 24
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 495
:SBUS<n>:LIN:PARity
(see page 798)
Command Syntax
:SBUS<n>:LIN:PARity <display>
<display> ::= {{1 | ON} | {0 | OFF}}
The :SBUS<n>:LIN:PARity command determines whether the parity bits are
included as the most significant bits (MSB) in the display of the Frame Id field in
the LIN decode bus.
Query Syntax
:SBUS<n>:LIN:PARity?
The :SBUS<n>:LIN:PARity? query returns the current LIN parity bits display setting
of the serial decode bus.
Return Format
<display><NL>
<display> ::= {0 | 1}
Errors • "-241, Hardware missing" on page 759
See Also • "Introduction to :SBUS<n> Commands" on page 461
• ":SBUS<n>:LIN Commands" on page 493

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English