710 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
30 :WMEMory<r> Commands
:WMEMory<r>:YSCale
(see page 798)
Command Syntax
:WMEMory<r>:YSCale <scale>[<suffix>]
<r> ::= 1-2 in NR1 format
<scale> ::= vertical units per division in NR3 format
<suffix> ::= {V | mV}
The :WMEMory<r>:YSCale command sets the vertical scale, or units per division,
of the selected reference waveform.
Legal values for the scale are copied from the original source waveform (that is,
the analog channel or math function waveform that was originally saved as a
reference waveform).
Query Syntax
:WMEMory<r>:YSCale?
The :WMEMory<r>:YSCale? query returns the current scale setting for the
specified reference waveform.
Return Format
<scale><NL>
<scale> ::= vertical units per division in NR3 format
See Also • Chapter 30, “:WMEMory<r> Commands,” starting on page 701
• ":WMEMory<r>:DISPlay" on page 704
• ":WMEMory<r>:YOFFset" on page 708
• ":WMEMory<r>:YRANge" on page 709
• ":WMEMory<r>:SKEW" on page 707
To Next Page
Loading...
Need help?
General
