Keysight Technologies InfiniiVision DSOX1204A User Manual

450 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
23 :SAVE Commands
:SAVE:MASK[:STARt]
(see page 798)
Command Syntax
:SAVE:MASK[:STARt] [<file_spec>]
<file_spec> ::= {<internal_loc> | <file_name>}
<internal_loc> ::= 0-3; an integer in NR1 format
<file_name> ::= quoted ASCII string
The :SAVE:MASK[:STARt] command saves a mask.
See Also • "Introduction to :SAVE Commands" on page 442
• ":SAVE:FILename" on page 444
• ":RECall:MASK[:STARt]" on page 436
• ":MTESt:DATA" on page 414
NOTE
If a file extension is provided as part of a specified <file_name>, it must be ".msk".

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English