458 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
23 :SAVE Commands
:SAVE:WAVeform:SEGMented
(see page 798)
Command Syntax
:SAVE:WAVeform:SEGMented <option>
<option> ::= {ALL | CURRent}
When segmented memory is used for acquisitions, the
:SAVE:WAVeform:SEGMented command specifies which segments are included
when the waveform is saved:
• ALL — all acquired segments are saved.
• CURRent — only the currently selected segment is saved.
Query Syntax
:SAVE:WAVeform:SEGMented?
The :SAVE:WAVeform:SEGMented? query returns the current segmented
waveform save option setting.
Return Format
<option><NL>
<option> ::= {ALL | CURR}
See Also • "Introduction to :SAVE Commands" on page 442
• ":SAVE:WAVeform[:STARt]" on page 454
• ":SAVE:WAVeform:FORMat" on page 455
• ":SAVE:WAVeform:LENGth" on page 456
To Next Page
Loading...
Need help?
General
