262 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
15 :FFT Commands
:FFT:DISPlay
(see page 798)
Command Syntax
:FFT:DISPlay {{0 | OFF} | {1 | ON}}
The :FFT:DISPlay command turns the display of the FFT function on or off.
When ON is selected, the FFT function is calculated and displayed.
When OFF is selected, the FFT function is neither calculated nor displayed.
Query Syntax
:FFT:DISPlay?
The :FFT:DISPlay? query returns whether the function display is on or off.
Return Format
<display><NL>
<display> ::= {0 | 1}
See Also • ":FFT:CENTer" on page 261
• ":FFT:OFFSet" on page 263
• ":FFT:RANGe" on page 264
• ":FFT:REFerence" on page 265
• ":FFT:SCALe" on page 266
• ":FFT:SOURce1" on page 267
• ":FFT:SPAN" on page 268
• ":FFT:VTYPe" on page 269
• ":FFT:WINDow" on page 270
To Next Page
Loading...
Need help?
General
