Keysight Technologies InfiniiVision DSOX1204A User Manual

:TRIGger Commands 27
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 625
:TRIGger:TRANsition:SOURce
(see page 798)
Command Syntax
:TRIGger:TRANsition:SOURce <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :TRIGger:TRANsition:SOURce command selects the channel used to produce
the trigger.
Query Syntax
:TRIGger:TRANsition:SOURce?
The :TRIGger:TRANsition:SOURce? query returns the current transition trigger
source.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
See Also • "Introduction to :TRIGger Commands" on page 585
• ":TRIGger:MODE" on page 594
• ":TRIGger:TRANsition:SLOPe" on page 624

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English