Keysight Technologies InfiniiVision DSOX1204A User Manual

246 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
13 :DVM Commands
:DVM:MODE
(see page 798)
Command Syntax
:DVM:MODE <dvm_mode>
<dvm_mode> ::= {ACRMs | DC | DCRMs | FREQuency}
The :DVM:MODE command sets the digital voltmenter (DVM) mode:
• ACRMs — displays the root-mean-square value of the acquired data, with the
DC component removed.
• DC — displays the DC value of the acquired data.
• DCRMs — displays the root-mean-square value of the acquired data.
• FREQuency — displays the frequency counter measurement. Requires the EDGE
or GLITch trigger mode, and the DVM source and the trigger source must be
the same analog channel.
Query Syntax
:DVM:MODE?
The :DVM:MODE? query returns the selected DVM mode.
Return Format
<dvm_mode><NL>
<dvm_mode> ::= {ACRM | DC | DCRM | FREQ}
See Also • ":DVM:ENABle" on page 244
• ":DVM:SOURce" on page 247
• ":DVM:ARANge" on page 242
• ":DVM:CURRent" on page 243
• ":DVM:FREQuency" on page 245
• ":TRIGger:MODE" on page 594

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English