:SYSTem Commands 25
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 561
:SYSTem:RLOGger:DESTination
(see page 798)
Command Syntax
:SYSTem:RLOGger:DESTination <dest>
<dest> ::= {FILE | SCReen | BOTH}
The :SYSTem:RLOGger:DESTination command specifies whether remote
commands are logged to a text file (on a connected USB storage device), logged
to the screen, or both.
Query Syntax
:SYSTem:RLOGger:DESTination?
The :SYSTem:RLOGger:DESTination? query returns the remote command logging
destination.
Return Format
<dest><NL>
<dest> ::= {FILE | SCR | BOTH}
See Also • ":SYSTem:RLOGger" on page 560
• ":SYSTem:RLOGger:DISPlay" on page 562
• ":SYSTem:RLOGger:FNAMe" on page 563
• ":SYSTem:RLOGger:STATe" on page 564
• ":SYSTem:RLOGger:TRANsparent" on page 565
• ":SYSTem:RLOGger:WMODe" on page 566
If the destination is changed while remote command logging is running, remote command
logging is turned off.
To Next Page
Loading...
Need help?
General
