730 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
31 Obsolete and Discontinued Commands
:HARDcopy:PDRiver
(see page 798)
Command Syntax
:HARDcopy:PDRiver <driver>
<driver> ::= {AP2Xxx | AP21xx | {AP2560 | AP25} | {DJ350 | DJ35} |
DJ6xx | {DJ630 | DJ63} | DJ6Special | DJ6Photo |
DJ8Special | DJ8xx | DJ9Vip | OJPRokx50 | DJ9xx | GVIP |
DJ55xx | {PS470 | PS47} {PS100 | PS10} | CLASer |
MLASer | LJFastraster | POSTscript}
The HARDcopy:PDRiver command sets the hardcopy printer driver used for the
selected printer.
If the correct driver for the selected printer can be identified, it will be selected and
cannot be changed.
Query Syntax
:HARDcopy:PDRiver?
The :HARDcopy:PDRiver? query returns the selected hardcopy printer driver.
Return Format
<driver><NL>
<driver> ::= {AP2X | AP21 | AP25 | DJ35 | DJ6 | DJ63 | DJ6S | DJ6P |
DJ8S | DJ8 | DJ9V | OJPR | DJ9 | GVIP | DJ55 | PS10 |
PS47 | CLAS | MLAS | LJF | POST}
See Also • "Introduction to :HARDcopy Commands" on page 312
The :HARDcopy:PDRiver command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :HARDcopy:APRinter (see page 314) command instead.
To Next Page
Loading...
Need help?
General
