Keysight Technologies InfiniiVision DSOX1204A User Manual

676 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
29 :WGEN Commands
:WGEN:FUNCtion:PULSe:WIDTh
(see page 798)
Command Syntax
:WGEN:FUNCtion:PULSe:WIDTh <width>
<width> ::= pulse width in seconds in NR3 format
For Pulse waveforms, the :WGEN:FUNCtion:PULSe:WIDTh command specifies the
width of the pulse.
The pulse width can be adjusted from 20 ns to the period minus 20 ns.
Query Syntax
:WGEN:FUNCtion:PULSe:WIDTh?
The :WGEN:FUNCtion:PULSe:WIDTh? query returns the currently set pulse width.
Return Format
<width><NL>
<width> ::= pulse width in seconds in NR3 format
See Also • "Introduction to :WGEN Commands" on page 671
• ":WGEN:FUNCtion" on page 673

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English