Keysight Technologies InfiniiVision DSOX1204A User Manual

:SBUS<n> Commands 24
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 515
:SBUS<n>:SPI:SOURce:MISO
(see page 798)
Command Syntax
:SBUS<n>:SPI:SOURce:MISO <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :SBUS<n>:SPI:SOURce:MISO command sets the source for the SPI serial
MISO data.
Query Syntax
:SBUS<n>:SPI:SOURce:MISO?
The :SBUS<n>:SPI:SOURce:MISO? query returns the current source for the SPI
serial MISO data.
Return Format
<source><NL>
See Also • "Introduction to :TRIGger Commands" on page 585
• ":SBUS<n>:SPI:SOURce:MOSI" on page 516
• ":SBUS<n>:SPI:SOURce:CLOCk" on page 513
• ":SBUS<n>:SPI:SOURce:FRAMe" on page 514
• ":SBUS<n>:SPI:TRIGger:PATTern:MISO:DATA" on page 517
• ":SBUS<n>:SPI:TRIGger:PATTern:MOSI:DATA" on page 519
• ":SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh" on page 518
• ":SBUS<n>:SPI:TRIGger:PATTern:MOSI:WIDTh" on page 520

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English