168 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
7 :ABUS Commands
Introduction to
:ABUS Commands
The ABUS subsystem commands control the viewing, labeling, and analog channel
bus makeup.
Reporting the Setup
Use :ABUS? to query setup information for the ABUS subsystem.
Return Format
The following is a sample response from the :ABUS? query. In this case, the query
was issued following a *RST command.
:ABUS:DISP 0;LAB "ABUS1";MASK +0