Keysight Technologies InfiniiVision DSOX1204A User Manual

344 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
20 :MEASure Commands
:MEASure:NWIDth
[<source>] (see
page 367)
:MEASure:NWIDth?
[<source>] (see
page 367)
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r> |
EXTernal}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= negative
pulse width in seconds-NR3 format
:MEASure:OVERshoot
[<source>] (see
page 368)
:MEASure:OVERshoot?
[<source>] (see
page 368)
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= the percent of
the overshoot of the selected
waveform in NR3 format
:MEASure:PEDGes
[<source>] (see
page 370)
:MEASure:PEDGes?
[<source>] (see
page 370)
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= the rising
edge count in NR3 format
:MEASure:PERiod
[<source>] (see
page 371)
:MEASure:PERiod?
[<source>] (see
page 371)
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r> |
EXTernal}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= waveform
period in seconds in NR3 format
:MEASure:PHASe
[<source1>]
[,<source2>] (see
page 372)
:MEASure:PHASe?
[<source1>]
[,<source2>] (see
page 372)
<source1,2> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= the phase
angle value in degrees in NR3
format
Table 65 :MEASure Commands Summary (continued)
Command Query Options and Query Returns

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English