Keysight Technologies InfiniiVision DSOX1204A User Manual

714 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
31 Obsolete and Discontinued Commands
Discontinued
Commands
Discontinued commands are commands that were used by previous oscilloscopes,
but are not supported by the InfiniiVision DSOX1204A/G oscilloscopes. Listed
below are the Discontinued commands and the nearest equivalent command
available (if any).
:SAVE:IMAGe:AREA (see
page 754)
none
:TIMebase:DELay (see
page 755)
:TIMebase:POSition (see
page 576) or
:TIMebase:WINDow:POSition
(see page 581)
TIMebase:POSition is position
value of main time base;
TIMebase:WINDow:POSition is
position value of zoomed
(delayed) time base window.
:TRIGger:TV:TVMode (see
page 756)
:TRIGger:TV:MODE (see
page 629)
Obsolete Command Current Command Equivalent Behavior Differences
Discontinued Command Current Command Equivalent Comments
ASTore :DISPlay:PERSistence INFinite
(see page 239)
CHANnel:MATH :FUNCtion:OPERation (see
page 303)
ADD not included
CHANnel<n>:PROTect :CHANnel<n>:PROTection (see
page 217)
Previous form of this command
was used to enable/disable
50Ω protection. The new
command resets a tripped
protect and the query returns
the status of TRIPed or
NORMal.
DISPlay:INVerse none
DISPlay:COLumn none
DISPlay:FREeze none
DISPlay:GRID none
DISPLay:LINE none
DISPlay:PIXel none
DISPlay:POSition none
DISPlay:ROW none
DISPlay:TEXT none
FUNCtion:MOVE none
FUNCtion:PEAKs none

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English