18-14 Preferences Model 831 Manual
The jack function setting becomes
active as soon as it is selected.
Use the 8 and 2 keys to highlight the Jack Function
field and press
5 to obtain a listing of the choices as shown
in FIGURE 18-17.
FIGURE 18-17 Jack Function Preferences
Highlight the desired Jack Function press
5 to make the
selection.
Reset Prompting
If the Reset Prompting check box is checked, the user will
be prompted with an “Are You Sure” message box whenever
the
1 (RESET) key is pressed. If it is not checked, this
prompt will not appear prior to the reset action taking place.
Highlight the Reset Prompting check box. Pressing
5
toggles the state of the check box.
Takt Maximal Data
The definition of LAFTM5 is shown
in "Taktmaximal-5" on page D-21.
When this is checked, the parameter LAFTM5 is also
measured and displayed on the Overall and Current tabs
and as a parameter of a Time History measurement.
USB Host Port
Note that this must be On in order to
utilize the USB Port with peripheral
devices.
This function controls the power to the USB Port, so it must
be set to On in order to utilize it with peripheral devices.
Highlight the USB Host Port field and press
5 to obtain a
listing of the choices as shown in FIGURE 18-17.
FIGURE 18-18 USB Host Port On/Off Menu
Highlight the desired USB Host Port Status and press
5 to
make the selection. When the USB Host Port is set On,
To Next Page
Loading...
