Leibinger JET3 - Test Print Functionality

Group 7 Data/Programming Page 111
Release R1.03e LEIBINGER JET3
7.5.2 Test print
With the option <Test Print> a defined default job with set internal PrintGo-source
is loaded.
This job can be used by the operator as basis to create a new job or to control the
print function of the JET3.
The default job is loaded as following:
Figure 59
Test print (Load default job)
1 – Button <Extra> 5 – Button <OK>
2 – Option <Test Print> 6 – Button <Cancel>
3 – Direct button (Icon) 7 – Execution report
4 – Message <Safety query> 8 – Button <OK>
1
2
3
7
o
r
loaded default job
8
4
5
6