Group 8 Job editor Page 181
Release R1.03e LEIBINGER JET3
8.5.3.4 Printing mode
With the Pop-up window <Print mode >
you can select the required printing mode.
10 printing modes are available.
That means in the LEIBINGER JET3 one operating mode is available for every
printing mode for a very high-quality or fast print out (see following list).
High quality mode: Allows the best possible position of the single dots and
therefore the best possible print quality.
If the required speed cannot be reached in this HQ-mode, it
has to be changed to the high speed mode.
High speed mode: The font output is not designed to the best possible font
quality but to the fastest possible print speed.
Figure 115
Print mode
Pos. Print mode Annotation
1. 5 dot high quality Is not available at the moment.
2. 5 dot high speed
3. 7 dot high quality Is not available at the moment
4. 7 dot high speed
5. 16 dot high quality Is not available at the moment
6. 16 dot high speed
7. 24 dot high quality
8. 24 dot high speed Is not available at the moment
9. 32 dot high quality
10. 32 dot high speed Is not available at the moment
To Next Page
Loading...
