Leibinger JET3 - Job and Editor Management

Group 8 Job editor Page 158
Release R1.03e LEIBINGER JET3
8.3 Job(editor)management
In the job management the following submenus are available:
 Save Job  Save Job as  Close Editor
 Load Job to print
8.3.1 Save job/Save job as
With the option <Save Job>,
a job which opened for editing is saved under the
current name.
With the option <Save Job as>,
a job which opened for editing or a new created
job can be saved under a new or particular name.
Attention! If a job is saved under an already existing data file name,
no further safety query happens. The existing data will be
overwritten.
Proceeding:
 Press the button <Job> (1) and the option <Save Job as> (2).
 The window <Save Job> (3) is faded in.
 The names of the already existing graphics are displayed in the data file selection
field (4). With the Pop-up window <Search in>
(5) you can select the different
memory devices.
 Click in the display <Filename> (6). A keyboard field (7) opens for input.
You will find further
information regarding the operation with
keyboard fields in the chapter Keyboard field!
 Enter the requested name.
 Press the button <Enter> (8) of the keyboard field. The entered name is taken
over to the display <name> (6).
 Press the button <Save> (9) to finish the saving process or press the button
<Cancel> (10) to abort the process.