Leibinger JET3 - Switch off Device

Group 6 Operation – Elements and procedures Page 62
Release R1.03e LEIBINGER JET3
6.4.6 Switch off device
Figure 23
Switch-off procedure
1 – Button <Off> 4 – Button <No>
2 – Message <Safety query> 5 – Message <Shutdown>
3 – Button <Yes>
Proceeding:
 Press the button <Off> (1).
 A safety query (2), if the printer should be really switched off is faded in.
 Confirm the shut down of the device by pressing the button <Yes> (3) or
cancel the process with the button <No> (4) ab.
 Now the device is turned off. During the shut down the message <Shutdown>
(5) is displayed.
Comment:
If the nozzle is still open during the turn-off procedure, it will be
closed automatically.
Turning off the device is only possible after a print stop has
been carried out!
After turning off you have to wait approx. 5 sec. to turn on the
device again.
1
3
2
5
4