Leibinger JET3 - Integration of Counters

Group 8 Job editor Page 189
Release R1.03e LEIBINGER JET3
EAN 13:
 numeric code (only numbers from 0-9 can be displayed)
 has to be always 13-digits (12 performance characters and 1 check digit)
(is available with or without clear figure for the LEIBINGER JET3)
UPC A: (American equivalent to EAN13)
 numeric code (only numbers from 0-9 can be displayed)
 has to be always 12-digits (11 performance characters and 1 check digit)
 (is available with or without clear figure for the LEIBINGER JET3)
UPC E: (American equivalent to EAN8)
 numeric code (only numbers from 0-9 can be displayed)
 has to be always 8-digits
(6 performance character, 1 check digit and 1 system character)
 (is available with or without clear figure for the LEIBINGER JET3)
Datamatrix-Code (2D-Code):
 up to 50 numerical numbers can be displayed or
up to 36 letters can be
displayed (the combination of numbers and letters is alllowed).
 The form has to be always set that it corresponds with a square.
8.7.1.2 Integration of counters
Due to integrated counters and replacements impermissible number
of digits or invalid constellations can be caused. These barcodes are
displayed as crossed out codes in the software.
Error example:
Display of a correct
barcode
Display of an invalid
barcode