Leibinger JET3 - Create a New Job

Group 7 Data/Programming Page 68
Release R1.03e LEIBINGER JET3
7.2.1 Create a new job
With the option <Create a new Job> or by pressing on the accordant direct
buutton (Icon) you can create a new job. For creation the job editor opens where
you can create the printing data and save it as a job. A variety of Windows® similar
tools make the operation easier.
Figure 28
Create a new job
1 – Button <Job> 4 – Menu <Jobeditor>
2 – Option <Create new Job> 5 – Button<Close>
3 – Direct button (Icon)
Proceeding:
 Press the button <Job> (1) and the option <Create new Job> (2) or press the
accordant direct button [icon] (3).
 The menu <Jobeditor> (4) opens to create the printing data.
 Carry out the requested inputs and save the job data. You will find further
information regarding the memory process in the group Jobeditor in the chapter
Save job/Save job as.
You will find further information regarding the operation of the job
editor in the group Jobeditor.
1
2
4
o
r
3
5