Leibinger JET3 - Printgo-Repetitions

Group 8 Job editor Page 171
Release R1.03e LEIBINGER JET3
8.5.1.3 PrintGo-repetitions
The setting defines the amount of text outputs (print repetitions) by the set value
between the several text outputs. Values between 0 – 1000 are permitted.
Example:
0 = no repetition (single print)
1 = one repetition (double print)
The set value is shown on the accordant display field.
To get an endless repetition of the print outputs, you have to activate the control
box <Endless> (2).
Figure 105
PrintGo-repetitions
1 – Display field <PrintGo-Repeat> 3 – Control box <Endless> active
2 – Control box <Endless> deactive
1
2
3