EasyManua.ls Logo

Leibinger JET3 - Accidental Release (Spillage) Procedures

Leibinger JET3
233 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Group 3 Accident prevention Page 22
Release R1.03e LEIBINGER JET3
3.4 Measures in the event of accidental release (spillage)
PRECAUTIONARY
MEASURES
Switch off sources of ignition and ventilate room. Keep
personnel that is not absolutely necessary away. Do not inhale
any vapour. Observe the protective measures listed.
ENVIRONMENTAL
PROTECTION
MEASURES
DO NOT allow to enter waste water channels or waters.
Should the product enter waste water channels or the drainage
system the local water supply authority must be informed
immediately. In the event of contamination of streams, rivers or
lakes inform the national water authorities. Vapour is heavier
than air and can spread out on the ground. In combination with
air it can form an explosive mixture.
RESTORATION Restrict and suck up spilled substances with a non-combustible
absorbent material (e.g. sand, earth, vermiculite, infusorial
earth) and collect in a suitable container for removal. Preferably
clean areas with spilled substances with a detergent. Avoid
solvents.

Table of Contents

Other manuals for Leibinger JET3

Related product manuals