Leibinger JET3 - Weekly Servicing Work; Anual Servicing Work

Group 10 Equipping/Maintenance Page 212
Release R1.03e LEIBINGER JET3
10.2.2 Weekly servicing work
The weekly servicing work includes the checking of the spindles and of the guides
of the nozzle seal for dirt. If necessary the components must be cleaned as
described in the chapter Cleaning.
This work must only be carried out by trained personnel or by
Leibinger service technicians!
10.2.3 Anual servicing work
The manufacturer recommends a regular servicing interval of 6–12 months.
This work must only be carried out by trained personnel or by
Leibinger service technicians!